SRD FAQ #18
What is the best method to remove, clean and reinstall a door seal?
| Removing Window/Door Seal | |
| Use needle nose pliers with smooth jaws. Be sure to get a good grip on door seal |  |
|
Pull up on door seal while gripping the seal with with your fingers (Do not let pliers slip as this can damage seal).
|
 |
|
Complete the removal process by pulling remainder of seal out of the window groove.
|
 |
| Installing Window/Door Seal | |
| Soak the edge of a clean wipe with IPA (isopropyl alcohol) and clean the window groove. |
 |
| Soak the edge of a clean wipe with IPA (isopropyl alcohol) and clean the door seal. |
 |
| Slip the door seal into the window groove. |  |
| Stretch the door seal onto the entire window |  |
| Check the edges of the door seal to ensure they are fitting securely into window groove. |  |
|
Hold the remaining edge of door seal and snap into place.
If door seal did not insert properly remove and reinsert.
|
|
Still have questions? Contact Rhetech Customer Service